We can Unlock AVR IC ATMEL AT90CAN64, please view the MCU IC chip features for your reference:
1. Features
· High-performance, Low-power AVR 8-bit Microcontroller
· Advanced RISC Architecture
– 133 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers + Peripheral Control Registers
– Fully Static Operation
– Up to 16 MIPS Throughput at 16 MHz
– On-chip 2-cycle Multiplier
· Non volatile Program and Data Memories
– 32K/64K Bytes of In-System Reprogrammable Flash (AT90CAN32/64)
· Endurance: 10,000 Write/Erase Cycles
– Optional Boot Code Section with Independent Lock Bits
· Selectable Boot Size: 1K Bytes, 2K Bytes, 4K Bytes or 8K Bytes
· In-System Programming by On-Chip Boot Program (CAN, UART)
· True Read-While-Write Operation
– 1K/2K Bytes EEPROM (Endurance: 100,000 Write/Erase Cycles) (AT90CAN32/64)
– 2K/4K Bytes Internal SRAM (AT90CAN32/64)
– Up to 64K Bytes Optional External Memory Space
– Programming Lock for Software Security
· JTAG (IEEE std. 1149.1 Compliant) Interface
– Boundary-scan Capabilities According to the JTAG Standard
– Programming Flash (Hardware ISP), EEPROM, Lock & Fuse Bits
– Extensive On-chip Debug Support
· CAN Controller 2.0A & 2.0B
– 15 Full Message Objects with Separate Identifier Tags and Masks
– Transmit, Receive, Automatic Reply and Frame Buffer Receive Modes
– 1Mbits/s Maximum Transfer Rate at 8 MHz
– Time stamping, TTC & Listening Mode (Spying or Autobaud)
· Peripheral Features
– Programmable Watchdog Timer with On-chip Oscillator
– 8-bit Synchronous Timer/Counter-0
· 10-bit Prescaler
· External Event Counter
· Output Compare or 8-bit PWM Output
– 8-bit Asynchronous Timer/Counter-2
· 10-bit Prescaler
· External Event Counter
· Output Compare or 8-Bit PWM Output
· 32Khz Oscillator for RTC Operation
– Dual 16-bit Synchronous Timer/Counters-1 & 3
· 10-bit Prescaler
· Input Capture with Noise Canceler
· External Event Counter
· 3-Output Compare or 16-Bit PWM Output
· Output Compare Modulation
– 8-channel, 10-bit SAR ADC
· 8 Single-ended Channels
· 7 Differential Channels
· 2 Differential Channels With Programmable Gain at 1x, 10x, or 200x
– On-chip Analog Comparator
– Byte-oriented Two-wire Serial Interface
– Dual Programmable Serial USART
– Master/Slave SPI Serial Interface
· Programming Flash (Hardware ISP)
· Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated RC Oscillator
– 8 External Interrupt Sources
– 5 Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down & Standby
– Software Selectable Clock Frequency
– Global Pull-up Disable
· I/O and Packages
– 53 Programmable I/O Lines
– 64-lead TQFP and 64-lead QFN
· Operating Voltages
– 2.7 – 5.5V
· Operating temperature
– Industrial (-40°C to +85°C)
· Maximum Frequency
– 8 MHz at 2.7V – Industrial range
– 16 MHz at 4.5V – Industrial range