IC Crack Service | MCU Crack Service | Microcontroller Unlock Service Provider

We can Unlock AVR IC ATMEL AT90CAN64, please view the MCU IC chip features for your reference:

· High-performance, Low-power AVR 8-bit Microcontroller

· Advanced RISC Architecture

– 133 Powerful Instructions – Most Single Clock Cycle Execution

– 32 x 8 General Purpose Working Registers + Peripheral Control Registers

– Fully Static Operation

– Up to 16 MIPS Throughput at 16 MHz

– On-chip 2-cycle Multiplier

· Non volatile Program and Data Memories

– 32K/64K Bytes of In-System Reprogrammable Flash (AT90CAN32/64)

· Endurance: 10,000 Write/Erase Cycles

– Optional Boot Code Section with Independent Lock Bits

· Selectable Boot Size: 1K Bytes, 2K Bytes, 4K Bytes or 8K Bytes

· In-System Programming by On-Chip Boot Program (CAN, UART)

· True Read-While-Write Operation

– 1K/2K Bytes EEPROM (Endurance: 100,000 Write/Erase Cycles) (AT90CAN32/64)

– 2K/4K Bytes Internal SRAM (AT90CAN32/64)

– Up to 64K Bytes Optional External Memory Space

– Programming Lock for Software Security

· JTAG (IEEE std. 1149.1 Compliant) Interface

– Boundary-scan Capabilities According to the JTAG Standard

– Programming Flash (Hardware ISP), EEPROM, Lock & Fuse Bits

– Extensive On-chip Debug Support

· CAN Controller 2.0A & 2.0B

– 15 Full Message Objects with Separate Identifier Tags and Masks

– Transmit, Receive, Automatic Reply and Frame Buffer Receive Modes

– 1Mbits/s Maximum Transfer Rate at 8 MHz

– Time stamping, TTC & Listening Mode (Spying or Autobaud)

· Peripheral Features

– Programmable Watchdog Timer with On-chip Oscillator

– 8-bit Synchronous Timer/Counter-0

· 10-bit Prescaler

· External Event Counter

· Output Compare or 8-bit PWM Output

– 8-bit Asynchronous Timer/Counter-2

· 10-bit Prescaler

· External Event Counter

· Output Compare or 8-Bit PWM Output

· 32Khz Oscillator for RTC Operation

– Dual 16-bit Synchronous Timer/Counters-1 & 3

· 10-bit Prescaler

· Input Capture with Noise Canceler

· External Event Counter

· 3-Output Compare or 16-Bit PWM Output

· Output Compare Modulation

– 8-channel, 10-bit SAR ADC

· 8 Single-ended Channels

· 7 Differential Channels

· 2 Differential Channels With Programmable Gain at 1x, 10x, or 200x

– On-chip Analog Comparator

– Byte-oriented Two-wire Serial Interface

– Dual Programmable Serial USART

– Master/Slave SPI Serial Interface

· Programming Flash (Hardware ISP)

· Special Microcontroller Features

– Power-on Reset and Programmable Brown-out Detection

– Internal Calibrated RC Oscillator

– 8 External Interrupt Sources

– 5 Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down & Standby

– Software Selectable Clock Frequency

– Global Pull-up Disable

· I/O and Packages

– 53 Programmable I/O Lines

– 64-lead TQFP and 64-lead QFN

· Operating Voltages

– 2.7 – 5.5V

· Operating temperature

– Industrial (-40°C to +85°C)

· Maximum Frequency

– 8 MHz at 2.7V – Industrial range

– 16 MHz at 4.5V – Industrial range