Secured Microcontroller STM32F038G6 Flash Heximal Dumping needs to firstly breaking stm32f038g6 mcu readout protection through focus ion beam, and then extract microprocessor stm32f038g6 source code from its flash memory;
The NRST pin input driver uses the CMOS technology. It is connected to a permanent pull- up resistor, RPU. Unless otherwise specified, the parameters given in the table below are derived from tests performed under the ambient temperature and supply voltage conditions
The NPOR pin input driver uses the CMOS technology. It is connected to a permanent pull- up resistor to the VDDA, RPU. Unless otherwise specified, the parameters given in Table 48 below are derived from tests performed under ambient temperature and supply voltage conditions summarized.
Power supply decoupling should be performed as shown in below Figure: Power supplyscheme. The 10 nF capacitor should be ceramic (good quality) and it should be placed as close as possible to the chip.