Readout Microchip PIC12LF1571 Protected MCU Firmware from its flash memory, breaking mcu pic12lf1571 protection over its flash memory, and then copy embedded code to new microprocessor pic12lf1571;
When there are multiple instances of the same peripheral in a device, the peripheral control registers will be depicted as the concatenation of a peripheral identifier, peripheral instance, and control identifier.
The control registers section will show just one instance of all the register names with an ‘x’ in the place of the peripheral instance number.
This naming convention may also be applied to peripherals when there is only one instance of that peripheral in the device to maintain compatibility with other devices to unlock the protection over pic18lf66k80 mcu flash memory in the family that contain more than one.
There are two variants for bit names:
Long name: Peripheral abbreviation + short name
Short bit names are an abbreviation for the bit function. For example, some peripherals are enabled with the EN bit. The bit names shown in the registers are the short name variant.
Short bit names are useful when accessing bits in C programs. The general format for accessing bits by the short name is RegisterNamebits. ShortName. For example, the enable bit, EN, in the COG1CON0 register can be set in C programs in the process of unlocking pic18lf65k80 microprocessor flash memory program with the instruction COG1CON0bits.EN = 1.