IC Crack Service | MCU Crack Service | Microcontroller Unlock Service Provider

– Operating power supply range 1.8 V to 3.6 V (down to 1.65 V at power down)

– Temperature range: – 40 °C to 85 or 125 °C

Low power features

– 5 low power modes: Wait , Low power run (5.4 µA), Low power wait (3 µA), Active-halt with RTC (1 µA), Halt (400 nA)

– Dynamic consumption: 192 µA/MHz

– Ultralow leakage per I/0: 50 nA

– Fast wakeup from Halt: 5 µs

Advanced STM8 core

– Harvard architecture and 3-stage pipeline

– Max freq. 16 MHz, 16 CISC MIPS peak

– Up to 40 external interrupt sources

Reset and supply management

– Low power, ultrasafe BOR reset with 5 selectable thresholds

– Ultralow power POR/PDR

– Programmable voltage detector (PVD) Clock management

– 1 to 16 MHz crystal oscillator

– 32 kHz crystal oscillator

– Internal 16 MHz factory-trimmed RC

– Internal 38 kHz low consumption RC

– Clock security system

Low power RTC

– BCD calendar with alarm interrupt

– Auto-wakeup from Halt w/ periodic interrupt

LCD: up to 4×28 segments w/ step-up converter Memories

– Up to 32 KB of Flash program memory and

12-bit ADC up to 1 Msps/25 channels

– T. sensor and internal reference voltage

2 Ultralow power comparators

– 1 with fixed threshold and 1 rail to rail

– Wakeup capability Timers

– Two 16-bit timers with 2 channels (used as IC, OC, PWM), quadrature encoder

– One 16-bit advanced control timer with 3 channels, supporting motor control

– One 8-bit timer with 7-bit prescaler

– 2 watchdogs: 1 Window, 1 Independent

– Beeper timer with 1, 2 or 4 kHz frequencies

Communication interfaces

– Synchronous serial interface (SPI)

– Fast I2C 400 kHz SMBus and PMBus

– USART (ISO 7816 interface and IrDA)

Up to 41 I/Os, all mappable on interrupt vectors

Up to 16 capacitive sensing channels with free firmware

Development support

– Fast on-chip programming and non intrusive debugging with SWIM

– Bootloader using USART 96-bit unique ID

1 Kbyte of data EEPROM with ECC, RWW