Pull AVR Microcontroller ATMEL AT90S8515

We can Pull AVR Microcontroller ATMEL AT90S8515 with 8K bytes In-System Programmable Flash, please view the IC chip features for your reference:

 

Features

· AVR – High Performance and Low Power RISC Architecture

· 118 Powerful Instructions – Most Single Clock Cycle Execution

· 8K bytes of In-System Reprogrammable Flash

– SPI Serial Interface for Program Downloading

– Endurance: 1,000 Write/Erase Cycles

512 bytes EEPROM – Endurance: 100,000 Write/Erase Cycles 512 bytes Internal SRAM

32 x 8 General Purpose Working Registers

32 Programmable I/O Lines

Programmable Serial UART

SPI Serial Interface

VCC: 2.7 – 6.0V

Fully Static Operation

– 0 – 8 MHz 4.0 – 6.0V,

– 0 – 4 MHz 2.7 – 4.0V

Up to 8 MIPS Throughput at 8 MHz

One 8-Bit Timer/Counter with Separate Prescaler

One 16-Bit Timer/Counter with Separate Prescaler and Compare and Capture Modes

Dual PWM

External and Internal Interrupt Sources

Programmable Watchdog Timer with On-Chip Oscillator

On-Chip Analog Comparator

Low Power Idle and Power Down Modes

Programming Lock for Software Security

 

8-Bit Microcontroller with 8K bytes In-System Programmable Flash

AT90S8515 Description

Preliminary

The AT90S8515 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the AT90S8515 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.

The AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.