We can Hack MCU IC Chip Renesas M306N5FCTFP, please view the microcontroller features for your reference:
The M16C/6N Group (M16C/6N5) of MCUs are built using the high-performance silicon gate CMOS process using the M16C/60 Series CPU core and are packaged in 100-pin plastic molded QFP and LQFP. These MCUs operate using sophisticated instructions featuring a high level of instruction efficiency.
With 1 Mbyte of address space, they are capable of executing instructions at high speed. Being equipped with one CAN (Controller Area Network) module in the M16C/6N Group (M16C/6N5), the MCU is suited to drive automotive and industrial control systems. The CAN module complies with the 2.0B specification. In addition, this MCU contains a multiplier and DMAC which combined with fast instruction processing capability which has similarity when Hack MCU IC Renesas MCU M306N4FCTFP, makes it suitable for control of various OA, communication, and industrial equipment which requires high-speed arithmetic/ logic operations.
Item |
Specification |
|||
Normal-ver. |
T/V-ver. |
|||
CPU |
Number of fundamental instructions |
91 instructions |
||
Minimum instruction |
41.7 ns (f(BCLK) = 24 MHz, 1/1 prescaler, without software wait) |
50.0 ns (f(BCLK) = 20 MHz, 1/1 prescaler, without software wait) |
||
Operating mode |
Single-chip, memory expansion, and microprocessor modes |
|||
Address space |
1 Mbyte |
|||
Memory capacity |
Refer to Table 1.2 Product Information |
|||
Peripheral Function |
Ports |
Input/Output: 87 pins, Input: 1 pin |
||
Multifunction timers |
Timer A: 16 bits ✕ 5 channels Timer B: 16 bits ✕ 6 channels Three-phase motor control circuit |
|||
Serial interfaces |
3 channels 2 (1) (2) Clock synchronous, UART, I C-bus , IEBus 1 channel Clock synchronous |
|||
A/D converter |
10-bit A/D converter: 1 circuit, 26 channels |
|||
D/A converter |
8 bits ✕ 2 channels |
|||
DMAC |
2 channels |
|||
CRC calculation circuit |
CRC-CCITT |
|||
CAN module |
1 channel with 2.0B specification |
|||
Watchdog timer |
15 bits ✕ 1 channel (with prescaler) |
|||
Interrupts |
Internal: 29 sources, External: 9 sources Software: 4 sources, Priority levels: 7 levels |
|||
Clock generation circuits |
4 circuits · Main clock oscillation circuit (*) · Sub clock oscillation circuit (*) · On-chip oscillator · PLL frequency synthesizer (*) Equipped with on-chip feedback resistor |
|||
Oscillation-stopped detector |
Main clock oscillation stop and re-oscillation detection function |
|||
Electrical Characteristics |
Supply voltage |
VCC = 3.0 to 5.5 V (f(BCLK) = 24 MHz, 1/1 prescaler, without software wait) |
VCC = 4.2 to 5.5 V (f(BCLK) = 20 MHz, 1/1 prescaler, without software wait) |
|
Consumption |
Mask ROM |
18 mA (f(BCLK) = 24 MHz, PLL operation, no division) |
16 mA (f(BCLK) = 20 MHz, PLL operation, no division) |
|
Flash memory |
20 mA (f(BCLK) = 24 MHz, PLL operation, no division) |
18 mA (f(BCLK) = 20 MHz, PLL operation, no division) |
||
Mask ROM |
3 µA (f(BCLK) = 32 kHz, Wait mode, Oscillation capacity Low) |
|||
0.8 µA (Stop mode, Topr = 25°C) | ||||
Flash Memory Version |
Programming and erasure voltage |
3.0 ± 0.3 V or 5.0 ± 0.5 V |
5.0 ± 0.5 V |
|
Programming and erasure endurance |
100 times |
|||
I/O Characteristics |
I/O withstand voltage |
5.0 V |
||
Output current |
5 mA |
|||
Operating Ambient Temperature |
-40 to 85°C |
T version: -40 to 85°C V version: -40 to 125°C (option) |
||
Device Configuration |
CMOS high-performance silicon gate |
|||
Package |
100-pin molded-plastic QFP, LQFP |