Dump NXP P87C575 Microcontroller Embedded Heximal

Dump NXP P87C575 Microcontroller Embedded Heximal is a common task for engineer who has the requirement to replace the burn out P87C575 from original PCB, hereby let’s get to know this chip more:

The Philips P87C575 is a high-performance microcontroller fabricated with Philips high-density CMOS technology. The Philips CMOS technology combines the high speed and density characteristics of HMOS with the low power attributes of CMOS. Philips epitaxial substrate minimizes latch-up sensitivity to Extract IC code.

Dump NXP P87C575 Microcontroller Embedded Heximal

Dump NXP P87C575 Microcontroller Embedded Heximal

The 8XC575 contains an 8k  8 ROM (P87C575) EPROM (87C575), a 256  8 RAM,
32 I/O lines, three 16-bit counter/timers, a Programmable Counter Array (PCA), a seven-source, two-priority level nested interrupt structure, an enhanced UART, four analog comparators, power-fail detect and oscillator fail detect circuits, and on-chip oscillator and clock circuits.

In addition, the P87C575 has a low active reset, and the port pins are reset to a low level. There is also a fully configurable watchdog timer, and internal power on clear circuit when Unlock NXP P87LPC767 Internal Memory Heximal. The part includes idle mode and power-down mode states for reduced power consumption.

ORDERING INFORMATION

ORDERING INFORMATION