We can Crack IC PIC18F2221 Firmware, please view the IC PIC18F2221 features for your reference:
Power-Managed Modes:
Run: CPU on, peripherals on
Idle: CPU off, peripherals on
Sleep: CPU off, peripherals off
Idle mode currents down to 2.5 ìA typical
Sleep mode currents down to 100 nA typical when Clone PIC MCU PIC18F4685
Timer1 Oscillator: 1.8 ìA, 32 kHz, 2V typical
Watchdog Timer: 1.4 ìA, 2V typical
Two-Speed Oscillator Start-up
Flexible Oscillator Structure:
· Four Crystal modes, up to 40 MHz
· 4x Phase Lock Loop (PLL) – available for crystal and internal oscillators if Crack IC PIC18F2221 Firmware
· Two External RC modes, up to 4 MHz
· Two External Clock modes, up to 40 MHz
· Internal oscillator block:
– 8 user-selectable frequencies, from 31 kHz to 8 MHz
– Provides a complete range of clock speeds from 31 kHz to 32 MHz when used with PLL
– User-tunable to compensate for frequency drift when MCU Reading
· Secondary oscillator using Timer1 @ 32 kHz
· Fail-Safe Clock Monitor
– Allows for safe shutdown if peripheral clock stops
Peripheral Highlights:
· High-current sink/source 25 mA/25 mA
· Three programmable external interrupts
· Four input change interrupts before Crack IC
· Up to 2 Capture/Compare/PWM (CCP) modules, one with Auto-Shutdown (28-pin devices)
· Enhanced Capture/Compare/PWM (ECCP) module (40/44-pin devices only):
– One, two or four PWM outputs to faciliate the process of Crack Microcontroller Microchip PIC18F8722
– Selectable polarity
– Programmable dead time
– Auto-Shutdown and Auto-Restart
· Master Synchronous Serial Port (MSSP) module supporting 3-wire SPI (all 4 modes) and I2C™ Master and Slave modes
· Enhanced Addressable USART module:
– Supports RS-485, RS-232 and LIN 1.2
– RS-232 operation using internal oscillator block (no external crystal required)
– Auto-Wake-up on Start bit
– Auto-Baud Detect
. 10-bit, up to 13-channel Analog-to-Digital Converter module (A/D):
– Auto-acquisition capability
– Conversion available during Sleep
· Dual analog comparators with input multiplexing
· Programmable 16-level High/Low-Voltage
Detection (HLVD) module:
– Supports interrupt on High/Low-Voltage Detection after Crack MCU