IC Crack Service | MCU Crack Service | Microcontroller Unlock Service Provider

Putting the CPU into wait mode while the FLASH is in read mode does not affect the operation of the FLASH memory directly and Copy Motorola MC68HC908EY8 CPU Code, but there will not be any memory activity since the CPU is inactive.

The WAIT instruction should not be executed while performing a program or erase operation on the FLASH after MCU reading, otherwise the operation will discontinue, and the FLASH will be on Standby Mode.

Copy Motorola MC68HC908EY8 CPU Code

Putting the MCU into stop mode while the FLASH is in read mode does not affect the operation of the FLASH memory directly, but there will not be any memory activity since the CPU is inactive.
The STOP instruction should not be executed while performing a program or erase operation on the FLASH, otherwise the operation will discontinue, and the FLASH will be on Standby Mode to faciliate the process of Break NXP MC908SR12 Microcontroller Flash.

Standby Mode is the power saving mode of the FLASH module in which all internal control signals to the FLASH are inactive and the current consumption of the FLASH is at a minimum.