IC Crack Service | MCU Crack Service | Microcontroller Unlock Service Provider

Clone MSP430F5438ACY Mixed Signal Microcontroller

Clone MSP430F5438ACY Mixed Signal Microcontroller stands for readout the firmware from both its eeprom and flash, then transfer it to other blank MSP430F5438ACY which will provide the same functions:

FEATURES

Low Supply Voltage Range: 2.2 V to 3.6 V

Ultralow Power Consumption

– Active Mode (AM):

All System Clocks Active

312 µA/MHz at 8 MHz, 3.0 V, Flash Program

Execution (Typical)

140 µA/MHz at 8 MHz, 3.0 V, RAM Program

Execution (Typical)

– Standby Mode (LPM3):

Real-Time Clock With Crystal , Watchdog,

and Supply Supervisor Operational, Full

RAM Retention, Fast Wake-Up:

2.6 µA at 3.0 V (Typical)

Low-Power Oscillator (VLO),

General-Purpose Counter, Watchdog, and

Supply Supervisor Operational, Full RAM

Retention, Fast Wake-Up:

1.8 µA at 3.0 V (Typical)

– Off Mode (LPM4):

Full RAM Retention, Supply Supervisor

Operational, Fast Wake-Up:

1.69 µA at 3.0 V (Typical)

Wake-Up From Standby Mode in Less Than 5 µs from RECOVER MCU

16-Bit RISC Architecture

– Extended Memory

– Up to 18-MHz System Clock

Flexible Power Management System

– Fully Integrated LDO With Programmable

Regulated Core Supply Voltage

– Supply Voltage Supervision, Monitoring, and Brownout

Unified Clock System

– FLL Control Loop for Frequency

16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers

16-Bit Timer TA1, Timer_A With Three Capture/Compare Registers

16-Bit Timer TB0, Timer_B With Seven Capture/Compare Shadow Registers

Up to Four Universal Serial Communication

Interfaces

– USCI_A0, USCI_A1, USCI_A2, and USCI_A3 Each Supporting

– Enhanced UART supporting Auto-Baudrate Detection

– IrDA Encoder and Decoder

– Synchronous SPI

– USCI_B0, USCI_B1, USCI_B2, and USCI_B3 Each Supporting

– I2CTM

– Synchronous SPI 12-Bit Analog-to-Digital (A/D) Converter

– Internal Reference

– Sample-and-Hold

– Autoscan Feature

– 14 External Channels, 2 Internal Channels Hardware Multiplier Supporting 32-Bit Operations

Serial Onboard Programming, No External

Programming Voltage Needed

Three Channel Internal DMA

Basic Timer With Real-Time Clock Feature

Family Members are Summarized in Table 1

For Complete Module Descriptions, See the

MSP430x5xx Family User’s Guide (SLAU208)