IC Crack Service | MCU Crack Service | Microcontroller Unlock Service Provider

Sitemap | Contact
You are here: Home > CPLD Crack > Clone IC AT87F51RB2 Eeprom

  • Product Categories

  • Live Support Chat

          

  • Customer Testimonials


    "We are very pleased with the business relationship we share with CECL. We have found their service to be dependable, friendly and reliability. Their attention to detail and willingness to listen to our requirement, care about each expectation of our company which extremely impress us."

    Sabrina Pinto
    V.P.Technical Officer
    Parding-Wave Technology.Inc

    "We deal with countless companies and services and CECL stands out from all the rest due to your incredible customer support. You guys call us and email us and do everything you can to help us get things done. We just groan when we have to deal with certain vendors, but you guys are a dream.”

    Kenneth Yovailov
    Hardware Engineer
    ATOM Solution.Inc

Clone IC AT87F51RB2 Eeprom

We can Clone IC AT87F51RB2 Eeprom, please view the IC AT87F51RB2 features for your reference:

Port 1 is an 8-bit bidirectional I/O port with internal pullups. The Port 1 output buffers can sink/source four TTL inputs. When 1s are written to Port 1 pins, they are pulled high by the internal pullups and can be used as inputs. As inputs, Port 1 pins that are externally being pulled low will source current (IIL) because of the internal pullups when Clone IC.

In addition, P1.0 and P1.1 can be configured to be the timer/counter 2 external count input (P1.0/T2) and the timer/counter 2 trigger input (P1.1/T2EX), respectively, as shown in the following table. Port 2 is an 8-bit bidirectional I/O port with internal pullups. The Port 2 output buffers can sink/source four TTL inputs. When 1s are written to Port 2 pins, they are pulled high by the internal pullups and can be used as inputs. As inputs, Port 2 pins that are externally being pulled low will source current (IIL) because of the internal pullups if Clone IC.

Port 2 emits the high-order address byte during fetches from external program memory and during accesses to external data memory that use 16-bit addresses (MOVX @ DPTR). In this application, Port 2 uses strong internal pullups when emitting 1s. During accesses to external data memory that use 8-bit addresses (MOVX @ RI), Port 2 emits the contents of the P2 Special Function Register before Clone IC.

Port 2 also receives the high-order address bits and some control signals during QuickFlash programming and verification. Port 3 is an 8-bit bidirectional I/O port with internal pullups. The Port 3 output buffers can sink/source four TTL inputs. When 1s are written to Port 3 pins, they are pulled high by the internal pullups and can be used as inputs after Clone IC.

As inputs, Port 3 pins that are externally being pulled low will source current (IIL) because of the pullups. Port 3 also serves the functions of various special features of the AT87F51RC, as shown in the following table. Port 3 also receives some control signals for QuickFlash programming and verification when Clone IC.

Reset input. A high on this pin for two machine cycles while the oscillator is running resets the device. This pin drives High for 96 oscillator periods after the Watchdog times out. The DISRTO bit in SFR AUXR (address 8EH) can be used to disable this feature. In the default state of bit DISTRO, the RESET HIGH out feature is enabled if Clone IC.

ALE/PROG

Address Latch Enable is an output pulse for latching the low byte of the address during accesses to external memory. This pin is also the program pulse input (PROG) during QuickFlash programming. In normal operation, ALE is emitted at a constant rate of 1/6 the oscillator frequency and may be used for external timing or clocking purposes. Note, however, that one ALE pulse is skipped during each access to external data memory before Clone IC.

If desired, ALE operation can be disabled by setting bit 0 of SFR location 8EH. With the bit set, ALE is active only during a MOVX or MOVC instruction. Otherwise, the pin is weakly pulled high. Setting the ALE-disable bit has no effect if the microcontroller is in external execution mode. Program Store Enable is the read strobe to external program memory after Clone IC.

When the AT87F51RC is executing code from external program memory, PSEN is activated twice each machine cycle, except that two PSEN activations are skipped during each access to external data memory.

EA/VPP

External Access Enable. EA must be strapped to GND in order to enable the device to fetch code from external program memory locations starting at 0000H up to FFFFH. Note, however, that if lock bit 1 is programmed, EA will be internally latched on reset when Clone IC.

EA should be strapped to VCC for internal program executions. This pin also receives the 12-volt programming enable voltage (VPP) during QuickFlash programming.

XTAL1

Input to the inverting oscillator amplifier and input to the internal clock operating circuit.

XTAL2

Output from the inverting oscillator amplifier.


Tags: ,,,,,,,,,

Related Products

Copyright © 2024 IC Crack Service | MCU Crack Service | Microcontroller Unlock Service Provider All Rights Reserved.

Designed by: WPYOU