IC Crack Service | MCU Crack Service | Microcontroller Unlock Service Provider

Reverse Engineering SPC560P40L1 MCU Flash Program is a process to recover embedded heximal from secured flash memory of locked microcontroller spc560p40l1, the security fuse bit of SPC560P40L1 will be disable so the software inside its flash memory can readout directly;

Communications interfaces

2 LINFlex channels (1× Master/Slave, 1× Master only)

Up to 3 DSPI channels with automatic chip select generation (up to 8/4/4 chip selects)

Up to 2 FlexCAN interface (2.0B Active) with 32 message buffers

1 safety port based on FlexCAN with 32 message buffers and up to 8 Mbit/s at

64 MHz capability usable as second CAN when not used as safety port

One 10-bit analog-to-digital converter (ADC)

Up to 16 input channels (16 on LQFP100 / 12 on LQFP64)

Conversion time < 1 µs including sampling time at full precision

Programmable Cross Triggering Unit (CTU)

4 analog watchdogs with interrupt capability

On-chip CAN/UART bootstrap loader with Boot Assist Module (BAM)

1 FlexPWM unit: 8 complementary or independent outputs with ADC synchronization signals.

This document provides electrical specifications, pin assignments, and package diagrams for the SPC560P34/40 series of microcontroller units (MCUs) which can provide key information about how to break stmicrocontroller spc560p34l1 flash memory. It also describes the device features and highlights important electrical and physical characteristics. For functional characteristics, refer to the device reference manual.