IC Crack Service | MCU Crack Service | Microcontroller Unlock Service Provider

Clone STM8S103F3P3 MCU Chip Locked Program Code needs to break off stm8s103f3p3 cpu flash memory’s fuse bit and extract heximal code from mcu stm8s103f3p3 flash memory;

Analog-to-digital converter (ADC1)

STM8S003F3/K3 value line products contain a 10-bit successive approximation A/D converter (ADC1) with up to 5 external multiplexed input channels and the following main features:

Input voltage range: 0 to VDDA

Conversion time: 14 clock cycles

Single and continuous, buffered continuous conversion modes

Buffer size (10 x 10 bits)

Scan mode for single and continuous conversion of a sequence of channels to unlock stm8s103f3p6 flash memory;

Analog watchdog capability with programmable upper and lower thresholds

Analog watchdog interrupt

External trigger input

Trigger from TIM1 TRGO

End of conversion (EOC) interrupt

Note:           Additional AIN12 analog input is not selectable in ADC scan mode or with analog watchdog.

Values converted from AIN12 are stored only into the ADC_DRH/ADC_DRL registers.

Communication interfaces

The following communication interfaces are implemented:

UART1: full feature UART, synchronous mode, SPI master mode, SmartCard mode, IrDA mode, LIN2.1 master capability when clone stm8s105k4 flash code;

SPI: full and half-duplex, 8 Mbit/s

I²C: up to 400 Kbit/s