Microcontroller MSP430G2111 Flash Memory Program Cloning is a process to break texas instrument mcu msp430g2111 security fuse bit inside flash memory and then extract embedded firmware from msp430g2111;
Most interrupt and module enable bits are collected into the lowest address space. Special function register bits not allocated to a functional purpose are not physically present in the device. Simple software access is provided with this arrangement.
WDTIE Watchdog Timer interrupt enable. Inactive if watchdog mode is selected. Active if Watchdog Timer is configured in interval timer mode.
OFIE Oscillator fault interrupt enable
NMIIE (Non)maskable interrupt enable
ACCVIE Flash access violation interrupt enable
WDTIFG Set on watchdog timer overflow (in watchdog mode) or security key violation. Reset on VCC power-on or a reset condition at the RST/NMI pin in reset mode to facilitate the progress of cracking mcu msp430g2001 flash memory.
OFIFG Flag set on oscillator fault.
PORIFG Power-On Reset interrupt flag. Set on VCC power-up