Crack MCU ATtiny861V Heximal

Crack MCU ATtiny861V needs to get the memory unlocked which include flash and eeprom storage and extract Heximal out from its memory, the way to verify the correctiveness of heximal is to copy the firmware into blank Microcontroller which is going to provide the same functions as originals;

Crack MCU ATtiny861V needs to get the memory unlocked which include flash and eeprom storage and extract Heximal out from its memory, the way to verify the correctivene

The ATtiny861V is a low-power CMOS 8-bit microcontroller based on the AVR RISC architecture. By executing powerful instructions in a single clock cycle. the ATtiny861V achieves throughputs approaching 1 MIPS per MHz, allowing the system designer to optimize power consumption versus processing speed.

The AVR core combines a rich instruction set with 32 general-purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU).

Allowing two independent registers to be accessed in one single instruction executed in one clock cycle.

The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.

The ATtiny861V provides the following features: 1K bytes of Flash, up to five general-purpose I/O lines, one input line, 32 general-purpose working registers, an 8-bit timer/counter, internal and external interrupts, programmable Watchdog Timer with internal oscillator, and two software-selectable power-saving modes which can be applied for MCU reading.

The Idle Mode stops the CPU while allowing the timer/counters and interrupt system to continue functioning. The Power-down Mode saves the register contents but freezes the oscillator, disabling all other chip functions until the next interrupt or hardware reset.

The wake-up or interrupt on pin change features enable the ATtiny861V to be highly responsive to external events, still featuring the lowest power consumption while in the power-down modes. The device is manufactured using Atmel’s high-density nonvolatile memory technology. By combining an RISC 8-bit CPU with Flash on a monolithic chip.

The Atmel ATtiny861V is a powerful microcontroller that provides a highly-flexible and cost-effective solution to many embedded control applications. The ATtiny861V AVR is supported with a full suite of program and system development tools including: macro assemblers, program debugger/simulators, in-circuit emulators, and evaluation kits.